What are the key specifications of TNR4018S-100MTF?

The part has 0.234 Ω maximum DCR, 24 MHz minimum self-resonant frequency, 0.84 A maximum Irms thermal-current rating, and 1.30 A maximum Isat saturation-current rating. Its body is 4.0 mm × 4.0 mm × 1.8 mm maximum.

What is the pinout of TNR4018S-100MTF?

Use the TNR4018S-100MTF datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TNR4018S-100MTF pinout to locate pins, power rails, and interface signals before layout.

TNR4018S-100MTF Datasheet, Specs, Alternatives & ECAD | APV

AI summary

TNR4018S-100MTF is a compact 10 µH shielded power inductor for SMD power rails where a 4 mm footprint and moderate DC-current capability are suitable.

Best for

Compact DC-DC converter output filtering
Power rails in consumer or communications equipment

Avoid if

The design needs continuous current above the 0.84 A maximum thermal rating
A tighter than ±20% inductance tolerance is required
The 4.0 mm × 4.0 mm footprint cannot be accommodated

Check before use

Confirm the lower of Irms and Isat is suitable for the actual current waveform.
Evaluate inductance loss under DC bias using the reference characteristic curve.
Use the specified reflow process and recommended land pattern.