What should engineers review before using TNR5040S-2R2NTF?

Review the 27 mOhm maximum DCR, 3.80 A maximum Irms, 4.90 A maximum Isat, 5.0 mm x 5.0 mm x 4.0 mm body size, and the required inductance margin at operating current.

What is the pinout of TNR5040S-2R2NTF?

Use the TNR5040S-2R2NTF datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TNR5040S-2R2NTF pinout to locate pins, power rails, and interface signals before layout.

TNR5040S-2R2NTF Datasheet, Specs, Alternatives & ECAD | APV

AI summary

TNR5040S-2R2NTF is a 2.2 uH, ±30% shielded wire-wound power inductor in a 5040 SMD package. The guaranteed current limits are 3.80 A Irms and 4.90 A Isat.

Best for

General power-conversion inductors where a 5 mm square, 4 mm high package is acceptable
Applications needing magnetic-resin shielding to reduce audible noise and leakage flux

Avoid if

The circuit requires a tightly controlled inductance value beyond ±30% tolerance
Operating current can exceed the lower 3.80 A guaranteed current limit
The design requires confirmed lifecycle, REACH, MSL, or export classification data