What should engineers review before using TPS76333DBVR-MS?

Check dropout headroom, dissipation calculated as (VIN − VOUT) × IOUT, capacitor placement, and the current-limit discrepancy between the electrical table and application guideline.

What is the pinout of TPS76333DBVR-MS?

Use the TPS76333DBVR-MS datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TPS76333DBVR-MS pinout to locate pins, power rails, and interface signals before layout.

TPS76333DBVR-MS Datasheet, Specs, Alternatives & ECAD | MSKSEMI

AI summary

TPS76333DBVR-MS is a fixed 3.3 V SOT-23-5 LDO for low-power rails, specified for 2 V to 24 V input and protected by current limit and thermal shutdown.

Best for

Low-power 3.3 V rails
Battery-powered equipment
Compact SOT-23-5 regulator designs

Avoid if

The required input-to-output headroom is below the applicable dropout voltage
Thermal dissipation exceeds the PCB/package capability
A verified lifecycle or compliance declaration is mandatory

Check before use

Use at least 1 µF input capacitance close to VIN and GND
Use 1 µF to 22 µF output capacitance close to VOUT and GND
Confirm load current requirement against the conflicting current-limit statements