TPS923654DMTR AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

TPS923654DMTR product

TPS923654DMTR

Power Management (PMIC)

LED driverboostbuck-boost65 V6.5 A current limitVSON-14PWM dimming

TPS923654DMTR is a 65 V-class, 6.5 A typical current-limit LED driver for non-synchronous boost and buck-boost designs requiring fast PWM or high-ratio dimming.

Best for

  • Wide-input LED boost designs
  • Buck-boost LED drivers
  • High-speed PWM dimming
  • Common-cathode LED assemblies

Avoid if

  • A synchronous power stage is required
  • The design requires spread-spectrum operation
  • The required peak inductor current exceeds the available switch-current limit margin

Check before use

  • Confirm peak inductor current remains below the device current limit under startup, transient, and fault conditions.
  • Verify all VIN, SW, OVP, CSP, and CSN voltages remain within their 63 V recommended operating limits.
  • Use the exposed thermal pad and a low-impedance PGND layout.

Key specifications

Input voltage
4.5 V to 63 V
Switch current limit
6.5 A typical
Switching frequency
100 kHz to 2.2 MHz
Package
VSON-14, 4.5 mm × 3.0 mm × 1.0 mm max

Compliance & Environment

RoHS
Yes
REACH
-
MSL
Level-1-260C-UNLIM
ECCN
-
HTSUS
-

Application

Professional LED lightingMachine vision and camera flashBattery charging in CC/CV mode

Datasheet

CAD Models

Download ECAD models for TPS923654DMTR: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol
Schematic symbol for your EDA tool
Get Files
PCB Footprint
Land pattern for PCB layout
Get Files
3D Model
STEP file for mechanical design
Get Files
KiCad Library
Verified KiCad 8 symbol, footprint, and 3D model
Generate library

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

TPS923654DMTR is a Texas Instruments 14-pin VSON non-synchronous LED driver with an integrated low-side NMOS switch. It supports boost and buck-boost LED drive from a 4.5 V to 63 V input range.