What should engineers review before using TS050125AGN-6R0M-B?

Check the 10.0 A maximum current, 25.0 mΩ maximum DCR, mechanical envelope of 19.0 mm × 17.5 mm × 15.2 mm maximum, PCB hole layout, and required isolation margin. Compliance and lifecycle information were not provided.

What is the pinout of TS050125AGN-6R0M-B?

Use the TS050125AGN-6R0M-B datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TS050125AGN-6R0M-B pinout to locate pins, power rails, and interface signals before layout.

TS050125AGN-6R0M-B Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TS050125AGN-6R0M-B is a 4-pin toroidal dual-winding inductor with 6.0 µH nominal inductance per winding, 10 A maximum current, and a 1:1 turns ratio.

Best for

Common-mode filtering
Power-line or power-path EMI filtering
Through-hole magnetic assemblies

Avoid if

A surface-mount component is required
Compliance documentation is mandatory but unavailable
The design requires characterized impedance-versus-frequency data

Check before use

Verify 6.0 µH ±20% at 100 kHz and 0.1 V
Confirm current derating and temperature rise at the intended operating current
Validate PCB hole spacing and lead diameter compatibility
Confirm 300 VAC for 60 s isolation is sufficient for the end application

Key specifications

Inductance: 6.0 µH ±20% per winding at 100 kHz, 0.1 V
Current rating: 10.0 A max
DCR: 25.0 mΩ max per winding
Turns ratio: 1:1 ±5%
Isolation test: 300 VAC for 60 s between windings
Maximum size: 19.0 mm × 17.5 mm × 15.2 mm

Application

EMI and common-mode noise filteringIndustrial power filtering

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

TS050125AGN-6R0M-B is a MINGSTAR 4-pin toroidal coupled inductor or common-mode choke. It has two windings connected as terminals 1-2 and 4-3.