What is TS3A5018DGVR used for?

It is used for analog or digital signal routing, including audio and video routing, sample-and-hold circuits, battery-powered equipment, and communications circuits. Signals can pass in either direction from 0 V to V+.

What should engineers review before using TS3A5018DGVR?

Check that the 1.65 V to 3.6 V supply range and 0 V to V+ analog range fit the system. EN must be driven to a defined logic level, and all channels switch together because IN is shared. The device uses break-before-make switching.

What is the pinout of TS3A5018DGVR?

Use the TS3A5018DGVR datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TS3A5018DGVR pinout to locate pins, power rails, and interface signals before layout.

TS3A5018DGVR Datasheet, Specs, Alternatives & ECAD | Texas Instruments

AI summary

TS3A5018DGVR is a low-voltage quad SPDT analog switch suited to routing four shared-control analog or digital signal paths within a 1.65 V to 3.6 V system.

Best for

Shared-control four-channel analog signal routing
Low-voltage portable electronics
Audio, video, and communication signal selection

Avoid if

Each channel needs independent selection
Signals exceed the V+ supply rail or go below ground
A continuously connected path is required during switching

Check before use

Confirm EN and IN logic thresholds at the selected supply voltage.
Budget on resistance for signal error and load current.
Use the TVSOP-16 land pattern and place supply bypass capacitance close to V+.

Key specifications

Configuration: 4 × SPDT
Supply range: 1.65 V to 3.6 V
Typical on resistance: 10 Ω at 3 V, 25°C
Bandwidth: 300 MHz typical at 3.3 V
Package: 16-pin TVSOP

Compliance & Environment

RoHS: ROHS3 Compliant
REACH: -
MSL: Level-1-260C-UNLIM
ECCN: -
HTSUS: -

Application

Analog signal routingAudio and video routingCommunication circuitsBattery-powered equipment

Datasheet

Texas-Instruments-company-64.pdf

800 KB

Datasheet AI

CAD Models

Download ECAD models for TS3A5018DGVR: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol

Schematic symbol for your EDA tool

Get Files

PCB Footprint

Land pattern for PCB layout

Get Files

3D Model

STEP file for mechanical design

Get Files

KiCad Library

Verified KiCad 8 symbol, footprint, and 3D model

Generate library

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

TS3A5018DGVR is a Texas Instruments quad single-pole-double-throw (SPDT) solid-state analog switch in a 16-pin TVSOP package. It provides four bidirectional COM-to-NC/NO signal paths controlled by common IN and active-low EN inputs.

AI summary

Best for

Avoid if

Check before use

Key specifications

Compliance & Environment

Application

Datasheet

CAD Models

Where to Buy

Alternative components

Design and risk insights

Questions & answers

What is TS3A5018DGVR?+×

What is TS3A5018DGVR used for?+×

What should engineers review before using TS3A5018DGVR?+×

What is the pinout of TS3A5018DGVR?+×