For BusinessPricing
Request a demo

U2103C AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

U2103C product

U2103C

MOSFETs - Single

600 Vhalf-bridge driverMOSFET driverIGBT driverbootstrapSOP-8active-low LIN

U2103C is a 600 V SOP-8 half-bridge gate driver for bootstrap-driven N-channel MOSFET or IGBT stages, with integrated shoot-through prevention and typical 220 ns dead time.

Best for

  • 600 V half-bridge MOSFET stages
  • Bootstrap high-side drivers
  • Motor and appliance inverter stages

Avoid if

  • A non-inverting low-side LIN input is required without logic inversion
  • The high-side switch must remain continuously on without bootstrap refresh
  • Documented compliance or lifecycle status is mandatory but unavailable

Check before use

  • LIN is active low on U2103C
  • VCC and VBS remain above UVLO during operation
  • High-side bootstrap supply is refreshed adequately
  • External dead-time and gate-resistor settings are validated on hardware

Key specifications

Offset voltage
600 V maximum
Output drive
0.4 A source / 0.6 A sink typical pulsed
Supply range
4.8 V to 20 V
Dead time
220 ns typical
Package
SOP-8

Compliance & Environment

RoHS
-
REACH
-
MSL
-
ECCN
-
HTSUS
-

Application

Motor driversIndustrial drivesHVAC and home appliancesDC-AC power stages

Datasheet

987a2fd507c9137ccaf01cfb4e846c79_U2103C.pdf

800 KB

Datasheet AI

CAD Models

Download ECAD models for U2103C: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol
Schematic symbol for your EDA tool
Get Files
PCB Footprint
Land pattern for PCB layout
Get Files
3D Model
STEP file for mechanical design
Get Files
KiCad Library
Verified KiCad 8 symbol, footprint, and 3D model
Generate library

Login required · CAD models billed separately as an add-on

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

U2103C is a 600 V high-voltage half-bridge gate driver for MOSFETs and IGBTs. It provides a floating bootstrap high-side output (HO) and a ground-referenced low-side output (LO) in an SOP-8 package.