What are the key specifications of UHV1A222MPD?

The part uses a 10 mm diameter × 25 mm long case with 5.0 mm lead pitch. Maximum impedance is 0.017 Ω at 20 °C and 100 kHz, and rated ripple current is 2475 mArms at 105 °C and 100 kHz.

What is the pinout of UHV1A222MPD?

Use the UHV1A222MPD datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about UHV1A222MPD pinout to locate pins, power rails, and interface signals before layout.

UHV1A222MPD Datasheet, Specs, Alternatives & ECAD | Nichicon

AI summary

UHV1A222MPD is a 2200 µF, 10 V Nichicon UHV radial aluminum electrolytic capacitor with a 10 mm × 25 mm case and high ripple-current capability.

Best for

Low-impedance bulk energy storage
Power-supply output filtering
High-ripple DC rails within 10 V rating

Avoid if

A non-polarized capacitor is required
Board space cannot accept a 10 mm × 25 mm radial capacitor
The circuit can exceed the rated voltage or apply reverse bias

Check before use

Confirm operating voltage, including transients, remains within the 10 V rating.
Check ripple-current and ambient-temperature conditions against the 105 °C rating.
Confirm the 5.0 mm lead pitch, polarity orientation, and can height.