What should engineers review before using URB2412JD-10W?

Check the 833 mA maximum output current, temperature derating, 1500 VDC input-output isolation test rating, 680 µF maximum capacitive load, and the required input/output capacitor arrangement. The module output must not be paralleled to increase power.

What is the pinout of URB2412JD-10W?

Use the URB2412JD-10W datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about URB2412JD-10W pinout to locate pins, power rails, and interface signals before layout.

URB2412JD-10W Datasheet, Specs, Alternatives & ECAD | Mornsun America, LLC

AI summary

URB2412JD-10W is a regulated 10 W isolated DC/DC module for 24 V nominal rails, accepting 9-36 VDC and delivering 12 VDC at up to 833 mA.

Best for

24 V industrial control rails needing isolated 12 V power
Instrumentation and communication equipment
Board-mounted low-power isolated supply rails

Avoid if

Input voltage is outside 9-36 VDC
Load requires more than 10 W or 833 mA at 12 V
Parallel converter outputs are required

Check before use

Apply the datasheet thermal derating curve
Keep output capacitance at or below 680 µF
Verify pinout: Vin, Ctrl, GND, 0V, Trim, +Vo
Use the recommended input and output capacitors

Key specifications

Input range: 9-36 VDC
Output: 12 VDC, 833 mA max
Power rating: 10 W
Isolation: 1500 VDC / 500 VAC for 1 min
Efficiency: 86% typ

Application

Industrial controlIsolated 12 V power railsInstrumentation

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

URB2412JD-10W is a MORNSUN isolated 10 W regulated single-output DC/DC converter in an uncased DIP package. It has a 24 V nominal input, a 9-36 VDC operating input range, and a 12 VDC output.