What is UTRS485G-S08-R used for?

It is intended for half-duplex differential serial data buses, including RS-485 networks and RS-422 interface applications, at data rates up to 500 kbps.

What should engineers review before using UTRS485G-S08-R?

Verify the 4.75 V to 5.25 V supply requirement, DE and active-low RE control logic, A/B bus polarity, network termination, and the required SOP-8 PCB footprint.

What is the pinout of UTRS485G-S08-R?

Use the UTRS485G-S08-R datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about UTRS485G-S08-R pinout to locate pins, power rails, and interface signals before layout.

UTRS485G-S08-R Datasheet, Specs, Alternatives & ECAD | UTC

AI summary

UTRS485G-S08-R is a 5 V SOP-8 half-duplex RS-485/RS-422 transceiver rated for data rates up to 500 kbps.

Best for

5 V half-duplex RS-485 buses
Low- to medium-speed differential communication up to 500 kbps
Systems needing fail-safe receiver behavior

Avoid if

A supply voltage outside 4.75 V to 5.25 V is required
Data rate above 500 kbps is required
Galvanic isolation is required

Check before use

Confirm A/B polarity across all bus nodes
Provide termination at the ends of the RS-485 cable
Confirm package dimensions and PCB footprint from an approved mechanical source

Key specifications

Supply voltage: 4.75 V to 5.25 V
Maximum data rate: 500 kbps
Interface: Half-duplex RS-485 / RS-422
Package: SOP-8
Bus capability: Up to 32 transceivers

Compliance & Environment

RoHS: RoHS

Application

Industrial RS-485 communicationDifferential data-bus interfaces

Datasheet

2108142230_UTC-Unisonic-Tech-UTRS485G-S08-R_C2848650.pdf

800 KB

Datasheet AI

CAD Models

Download ECAD models for UTRS485G-S08-R: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol

Schematic symbol for your EDA tool

Get Files

PCB Footprint

Land pattern for PCB layout

Get Files

3D Model

STEP file for mechanical design

Get Files

KiCad Library

Verified KiCad 8 symbol, footprint, and 3D model

Generate library

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

UTRS485G-S08-R is the SOP-8 version of UTC's UTRS485, a 5 V half-duplex RS-485/RS-422 transceiver with one driver and one receiver.

AI summary

Best for

Avoid if

Check before use

Key specifications

Compliance & Environment

Application

Datasheet

CAD Models

Where to Buy

Alternative components

Design and risk insights

Questions & answers

What is UTRS485G-S08-R?+×

What is UTRS485G-S08-R used for?+×

What should engineers review before using UTRS485G-S08-R?+×

What is the pinout of UTRS485G-S08-R?+×