What are the key specifications of UU9.8-12MH*0.31*65TS?

Each winding uses 0.31 mm wire with 65 reference turns. Inductance is specified as 12 mH minimum per winding at 1 kHz and 0.25 V. DC resistance is 500 mΩ maximum per winding at 25°C. The body is up to 12.0 mm × 16.5 mm × 16.0 mm.

What is the pinout of UU9.8-12MH*0.31*65TS?

Use the UU9.8-12MH*0.31*65TS datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about UU9.8-12MH*0.31*65TS pinout to locate pins, power rails, and interface signals before layout.

UU9.8-12MH*0.31*65TS Datasheet, Specs, Alternatives & ECAD | ZE

AI summary

A vertical UU9.8 common-mode choke with two 65-turn windings, specified for at least 12 mH per winding and up to 500 mΩ DCR.

Best for

Common-mode EMI filtering where a through-hole UU9.8 choke footprint is suitable
Low-frequency inductive filtering requiring at least 12 mH per winding

Avoid if

Rated current, impedance curve, or safety-isolation requirements must be documented
A compact surface-mount common-mode choke is required

Check before use

Confirm winding polarity and PCB pin mapping: N1 is 1-2 and N2 is 4-3
Validate DCR loss and temperature rise at the intended current
Confirm dielectric withstand requirements because the specification table has no completed limit