What should engineers review before using UWE1205S-3WR3?

Check the 4.5–36 V operating input range, 40 V maximum input rating, 10% minimum output load, recommended capacitive load, thermal derating, and PCB pin assignment.

What is the pinout of UWE1205S-3WR3?

Use the UWE1205S-3WR3 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about UWE1205S-3WR3 pinout to locate pins, power rails, and interface signals before layout.

UWE1205S-3WR3 Datasheet, Specs, Alternatives & ECAD | Mornsun America, LLC

AI summary

UWE1205S-3WR3 is a 3 W isolated SIP8 DC/DC module converting a nominal 12 VDC input to a regulated 5 VDC single output at up to 600 mA.

Best for

isolated 5 V rails
industrial control power
low-power power conversion

Avoid if

a non-isolated converter is required
the load is below the specified minimum without a preload
more than 600 mA output current is required

Check before use

input transients
output capacitor value and startup behavior
thermal derating
isolation and creepage requirements

Key specifications

Input: 12 V nominal; 4.5–36 VDC range
Output: 5 VDC, 600 mA maximum
Isolation: 3000 VDC
Package: SIP8; 22.00 mm × 9.50 mm × 12.00 mm

Application

Industrial controlIsolated power rails

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a 3 W isolated DC/DC power module in an SIP8 package, specified for 12 V nominal input and a 5 V, 600 mA single output.