What is VLCF4024T-100MR90-2 used for?

TDK identifies this series for power-source inductors in mobile equipment, LCD circuits, and other DC-DC converters. Its magnetic shield construction helps limit magnetic interference compared with unshielded inductors.

What should engineers review before using VLCF4024T-100MR90-2?

Verify inductance at the intended DC current, because the 0.90 A Isat specification corresponds to a 30% decrease from initial inductance. Also check 0.136 Ω maximum DC resistance, self-heating, the 4.0 mm × 4.0 mm × 2.4 mm maximum body size, and the recommended land pattern.

What is the pinout of VLCF4024T-100MR90-2?

Use the VLCF4024T-100MR90-2 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about VLCF4024T-100MR90-2 pinout to locate pins, power rails, and interface signals before layout.

VLCF4024T-100MR90-2 Datasheet, Specs, Alternatives & ECAD | TDK

AI summary

VLCF4024T-100MR90-2 is a 10 µH shielded power inductor in a 4 mm × 4 mm low-profile package, suited to compact DC-DC converter power stages up to its 0.90 A saturation-current rating.

Best for

Compact DC-DC converter output and input filtering
Mobile-device power circuits
Applications needing a shielded 10 µH SMD inductor

Avoid if

The circuit requires more than 0.90 A without accepting substantial inductance reduction
A verified lifecycle or long-term supply commitment is required but unavailable