What should engineers review before using X01BQ070AE4AD3?

Confirm the 14-pin through-hole PCB layout, 30.80 mm × 21.10 mm × 13.55 mm mechanical envelope, LED connections, shield connection, and PHY-side transformer pinout. The specified isolation test is 2250 V DC for 6 seconds between primary and secondary.

What is the pinout of X01BQ070AE4AD3?

Use the X01BQ070AE4AD3 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X01BQ070AE4AD3 pinout to locate pins, power rails, and interface signals before layout.

X01BQ070AE4AD3 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X01BQ070AE4AD3 is a dual-port RJ jack with integrated 10/100BASE-T magnetics and green/yellow LEDs. It is intended for through-hole Ethernet port implementations.

Best for

Dual-port 10/100 Ethernet equipment
Through-hole network interfaces
Industrial network ports

Avoid if

A different RJ jack footprint is required
Gigabit Ethernet magnetics are required
Compliance documentation is mandatory but unavailable

Check before use

PCB footprint and mounting-hole pattern
PHY-side pinout
LED polarity and drive circuit
Shield grounding method

Key specifications

Configuration: Dual-port RJ jack with integrated magnetics
Ethernet support: 10/100BASE-T
Turns ratio: 1CT:1CT ±2%
Open circuit inductance: 350 µH min
Isolation test: 2250 V DC, 6 s

Application

10/100 Ethernet portsIndustrial networking equipment

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

X01BQ070AE4AD3 is an XKB Connection dual-port shielded RJ jack with integrated Ethernet magnetics and green/yellow LEDs. The drawing specifies 10/100BASE-T transformer performance.