What should engineers review before using X1502T-PSN-A28RBYW-L100-T3?

Check mating compatibility, wire routing, and pin order. From the connector mating-face reference, pins 1 through 4 are red, black, yellow, and white. Each opposite end is tinned 3 mm.

What is the pinout of X1502T-PSN-A28RBYW-L100-T3?

Use the X1502T-PSN-A28RBYW-L100-T3 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X1502T-PSN-A28RBYW-L100-T3 pinout to locate pins, power rails, and interface signals before layout.

X1502T-PSN-A28RBYW-L100-T3 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X1502T-PSN-A28RBYW-L100-T3 is a 4-position, 100 +/- 5 mm wire harness with a connector housing at end A and 3 mm tinned UL1007 28 AWG leads at end B.

Best for

Short internal wire-to-board connections
Four-conductor harness assemblies

Avoid if

A specified current rating is required
Compliance documentation is mandatory
The mating connector has not been verified

Check before use

Verify the mating interface
Verify the 100 +/- 5 mm length tolerance
Confirm pinout at the mating-face orientation

Key specifications

Positions: 4
Wire length: 100 +/- 5 mm
Wire: UL1007, 28 AWG
Free-end finish: Tinned 3 mm

Application

Internal equipment wiringWire-to-board harnesses

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a four-wire harness from XKB Connection. It has one 4-position housing, four crimp terminals, and 100 +/- 5 mm UL1007 28 AWG wires with tinned free ends.