What are the key specifications of X1502T-PSN-A28RBYWGLPE-L100-T3?

The drawing specifies UL1007 28 AWG wires, 3 mm tinned free ends, and a 200 +/- 5 mm wire length. It also specifies insulation resistance of at least 20 Mohm and continuity resistance below 1 ohm.

What is the pinout of X1502T-PSN-A28RBYWGLPE-L100-T3?

Use the X1502T-PSN-A28RBYWGLPE-L100-T3 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X1502T-PSN-A28RBYWGLPE-L100-T3 pinout to locate pins, power rails, and interface signals before layout.

X1502T-PSN-A28RBYWGLPE-L100-T3 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X1502T-PSN-A28RBYWGLPE-L100-T3 is an 8-position, 1.50 mm pitch crimp wire harness using UL1007 28 AWG leads and 3 mm tinned free ends.

Best for

8-position internal wire-to-board connections
Applications requiring individually tinned wire ends

Avoid if

A verified 100 mm cable assembly is required
Compliance or lifecycle documentation is mandatory

Check before use

Verify the 200 +/- 5 mm drawing length against the procurement description
Confirm mating connector compatibility and pin order
Verify wire colors and free-end termination requirements

Key specifications

Positions: 8
Pitch: 1.50 mm
Wire: UL1007, 28 AWG
Drawing length: 200 +/- 5 mm
Free-end finish: Tin plated, 3 mm

Application

Internal equipment wiringWire-to-board connectivity

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is an 8-wire harness using an X1502H-08-NO 8-position housing and eight X1502T-PSN crimp terminals. The listed connector pitch is 1.50 mm.