What should engineers review before using X1511-PSN-A24RYYYYYB-L200-X1511T-F?

Confirm the mating connector, 1.50 mm connector-series compatibility, connector orientation, and pin map. The harness reverses pin order: A1 connects to B7 and A7 connects to B1.

What is the pinout of X1511-PSN-A24RYYYYYB-L200-X1511T-F?

Use the X1511-PSN-A24RYYYYYB-L200-X1511T-F datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X1511-PSN-A24RYYYYYB-L200-X1511T-F pinout to locate pins, power rails, and interface signals before layout.

X1511-PSN-A24RYYYYYB-L200-X1511T-F Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X1511-PSN-A24RYYYYYB-L200-X1511T-F product

XKB Connection X1511-PSN-A24RYYYYYB-L200-X1511T-F is a 7-position, 200 ±5 mm UL1571 24 AWG cable harness with reversed end-to-end pin numbering.

Best for

Seven-circuit internal harnesses
Applications requiring a 200 mm pre-terminated cable
Assemblies needing reversed connector pin order

Avoid if

A straight-through pin mapping is required
Verified compliance or lifecycle documentation is mandatory
Cable length outside 200 ±5 mm is needed

Check before use

Verify the exact mating housing and terminal interface
Check A-end and B-end orientation against the drawing
Validate the reversed wire sequence in the system schematic

Key specifications

Positions: 7 positions
Cable length: 200 ±5 mm
Wire: UL1571, 24 AWG
Pin map: A1→B7 to A7→B1
Wire colors: 1 red, 5 yellow, 1 black

Application

Internal equipment wiringConnector cable assemblies

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a 7-position cable assembly using two X1511H-07A-NO housings, 14 X1511T-PSN crimp terminals, and seven UL1571 24 AWG wires. The specified cable length is 200 ±5 mm.