What are the key specifications of X2011HF-02A-N0?

The housing has 2 positions at 2.00 mm pitch. The stated connector-system ratings are 250 V AC/DC, 3 A AC/DC, -40 C to +85 C, 800 V AC/minute withstand voltage, 1000 Mohm minimum insulation resistance, and 20 mohm maximum contact resistance.

What is the pinout of X2011HF-02A-N0?

Use the X2011HF-02A-N0 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X2011HF-02A-N0 pinout to locate pins, power rails, and interface signals before layout.

X2011HF-02A-N0 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X2011HF-02A-N0 is a 2-position XKB female crimp housing on 2.00 mm pitch, intended for the X2011W wafer and X2011TM terminal system.

Best for

2.00 mm pitch wire-to-board connector assemblies
Two-circuit crimp harnesses

Avoid if

A different pitch or circuit count is required
Compliance documentation is required but has not been verified

Check before use

Mating X2011W wafer
X2011TM terminal compatibility
Cable and crimp-tool requirements

Key specifications

Positions: 2
Pitch: 2.00 mm
Housing material: PA66 UL94V-0
Current rating: 3 A AC/DC
Voltage rating: 250 V AC/DC

Application

Wire-to-board connectionsGeneral electronic assemblies

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a 2-position PA66 UL94V-0 female housing with a locking feature for XKB's 2.00 mm pitch X2011 crimp-style connector system.