What are the key specifications of X2510T-06-PSN-A22RBYWGL-L150-T5?

The wire length is 150 +/- 5 mm. The free wire ends are tinned for 5 mm. The six positions are red, black, yellow, white, green, and blue in order. The drawing specifies insulation resistance of at least 20 MOhm and continuity resistance below 1 Ohm.

What is the pinout of X2510T-06-PSN-A22RBYWGL-L150-T5?

Use the X2510T-06-PSN-A22RBYWGL-L150-T5 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X2510T-06-PSN-A22RBYWGL-L150-T5 pinout to locate pins, power rails, and interface signals before layout.

X2510T-06-PSN-A22RBYWGL-L150-T5 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X2510T-06-PSN-A22RBYWGL-L150-T5 is a 6-position UL1007 22 AWG wire harness with a connector at one end and 5 mm tinned leads at the other.

Best for

Short board-to-wire interconnects requiring six color-coded 22 AWG leads

Avoid if

The mating connector family, pitch, voltage rating, or current rating has not been verified

Check before use

Verify connector mating geometry and keying
Check the defined terminal insertion-face pin order
Validate electrical ratings for the end application

Key specifications

Positions: 6
Wire: UL1007, 22 AWG
Cable length: 150 +/- 5 mm
Free-end finish: Tinned, 5 mm

Application

Board interconnect harnessesGeneral electronic assemblies

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a six-wire connector cable assembly. It uses a X2510H-07-N0 housing, six X2510T-PSN terminals, and UL1007 22 AWG wires.