What should engineers review before using X2510T-07-PSN-A22RBYWGLP-L300-T5?

Check the 1-to-7 pin sequence and wire colors, connector mating orientation, 5 mm tinned free-end requirement, cable length tolerance, and the electrical current and voltage requirements of the application. The supplied drawing does not state a current rating or compliance status.

What is the pinout of X2510T-07-PSN-A22RBYWGLP-L300-T5?

Use the X2510T-07-PSN-A22RBYWGLP-L300-T5 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X2510T-07-PSN-A22RBYWGLP-L300-T5 pinout to locate pins, power rails, and interface signals before layout.

X2510T-07-PSN-A22RBYWGLP-L300-T5 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X2510T-07-PSN-A22RBYWGLP-L300-T5 product

A 7-position, 2.54 mm pitch MX2510 cable assembly with 22 AWG UL1007 leads, 300 ± 5 mm overall cable length, and 5 mm tinned wire ends.

Best for

Seven-wire internal cable assemblies
2.54 mm pitch wire-to-board connections

Avoid if

A documented current rating is required
RoHS or REACH evidence is mandatory
A different connector pitch or pin sequence is required

Check before use

Verify mating connector compatibility
Verify pin orientation and color order
Verify electrical loading for the 22 AWG wires

Key specifications

Positions: 7
Pitch: 2.54 mm
Cable length: 300 ± 5 mm
Wire: UL1007, 22 AWG
Free-end finish: 5 mm tinned

Application

Internal equipment wiringWire-to-board interconnects

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is an XKB Connection 7-position wire harness using a 2.54 mm pitch MX2510 housing, seven crimp terminals, and UL1007 22 AWG wires. Its specified cable length is 300 ± 5 mm.