What should engineers review before using X3025T-02-PSN-A22RB-L500-X3025T-F?

Confirm connector compatibility, pin orientation, wire polarity, current and voltage requirements, and the required environmental and compliance conditions. The drawing maps A1 to B2 through the red wire and A2 to B1 through the black wire.

What is the pinout of X3025T-02-PSN-A22RB-L500-X3025T-F?

Use the X3025T-02-PSN-A22RB-L500-X3025T-F datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X3025T-02-PSN-A22RB-L500-X3025T-F pinout to locate pins, power rails, and interface signals before layout.

X3025T-02-PSN-A22RB-L500-X3025T-F Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X3025T-02-PSN-A22RB-L500-X3025T-F product

X3025T-02-PSN-A22RB-L500-X3025T-F is a 2-position, 3.00 mm pitch cable assembly using UL1007 22 AWG red and black wires with a nominal 500 mm length.

Best for

Short two-conductor board or harness interconnects

Avoid if

The design requires documented voltage, current, temperature, or compliance ratings that are not provided here.

Check before use

Mating connector compatibility
Pin orientation and wire mapping
Application electrical requirements

Key specifications

Positions: 2
Pitch: 3.00 mm
Cable length: 500 mm ±5 mm
Wire: UL1007, 22 AWG, red and black

Application

Board-to-board or harness interconnectLow-complexity two-wire assemblies

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a factory-defined two-wire cable assembly with 2-position, 3.00 mm pitch connectors at both ends. The specified cable length is 500 mm ±5 mm.