What are the key specifications of X3025T-03-PSN-A22RBY-L300-X3025T-Z?

The harness length is 300 ± 5 mm. It uses red, black, and yellow 22 AWG UL1007 wires. The circuit mapping is straight-through: pin 1 red to pin 1, pin 2 black to pin 2, and pin 3 yellow to pin 3. The listed connector pitch is 3.00 mm.

What is the pinout of X3025T-03-PSN-A22RBY-L300-X3025T-Z?

Use the X3025T-03-PSN-A22RBY-L300-X3025T-Z datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X3025T-03-PSN-A22RBY-L300-X3025T-Z pinout to locate pins, power rails, and interface signals before layout.

X3025T-03-PSN-A22RBY-L300-X3025T-Z Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X3025T-03-PSN-A22RBY-L300-X3025T-Z product

X3025T-03-PSN-A22RBY-L300-X3025T-Z is a 300 ± 5 mm, 3-position XKB Connection wire harness using UL1007 22 AWG red, black and yellow conductors.

Best for

Three-wire internal equipment harnesses
Straight-through 3-position interconnects

Avoid if

The required mating direction differs from the reversed orientation shown
A defined current, voltage, RoHS, or lifecycle requirement is mandatory

Check before use

Verify connector keying and mating-face orientation
Verify the 1-1, 2-2, 3-3 wire mapping
Confirm electrical ratings with the connector family documentation

Key specifications

Positions: 3
Pitch: 3.00 mm
Cable length: 300 ± 5 mm
Wire: UL1007, 22 AWG
Wire colors: Red / black / yellow

Application

Internal wire-to-board connectionsGeneral low-voltage equipment wiring

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a pre-assembled 3-position connector cable harness from XKB Connection. It has two X3025HM-03-N2 housings, six X3025T-PSN crimp terminals, and three UL1007 22 AWG wires.