What should engineers review before using X6511WR-30H-C60D30R2?

Check the mating connector, right-angle R2 orientation, 2.54 mm pitch PCB footprint, and Ø1.02 mm PCB drill requirement. Confirm that the 250 V AC/DC and 3 A AC/DC ratings are suitable for the assembled system and applicable safety spacing requirements.

What is the pinout of X6511WR-30H-C60D30R2?

Use the X6511WR-30H-C60D30R2 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X6511WR-30H-C60D30R2 pinout to locate pins, power rails, and interface signals before layout.

X6511WR-30H-C60D30R2 Datasheet, Specs, Alternatives & ECAD | 中国星坤(XKB Connection)

AI summary

X6511WR-30H-C60D30R2 is a 30-position, 2.54 mm pitch, right-angle through-hole wafer connector rated for 250 V AC/DC and 3 A AC/DC.

Best for

2.54 mm pitch through-hole board interconnects
Right-angle PCB connector arrangements

Avoid if

A documented RoHS or REACH declaration is mandatory
A surface-mount connector is required

Check before use

Mating-part compatibility
R2 orientation and mechanical clearance
PCB hole diameter and pitch
System-level voltage spacing

Key specifications

Positions: 30
Pitch: 2.54 mm
Voltage rating: 250 V AC/DC
Current rating: 3 A AC/DC
Mounting style: 90° right-angle through-hole

Application

Board-to-board interconnectGeneral electronic equipment

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is an XKB 1x30-position board-to-board wafer connector with 2.54 mm contact pitch and a 90° right-angle through-hole configuration. It uses a PA6T UL94V-0 housing and brass pins with 1 µin gold plating.