What are the key specifications of X9556T-02-PSN-A22RB-L200-T5?

The assembly has a 2.54 mm, 2-position connector, red and black UL1007 22 AWG wires, a 200 ±5 mm cut length, and 5 mm tinning at the free ends. Red is position 1 and black is position 2.

What is the pinout of X9556T-02-PSN-A22RB-L200-T5?

Use the X9556T-02-PSN-A22RB-L200-T5 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X9556T-02-PSN-A22RB-L200-T5 pinout to locate pins, power rails, and interface signals before layout.

X9556T-02-PSN-A22RB-L200-T5 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X9556T-02-PSN-A22RB-L200-T5 is a 2-position, 2.54 mm wire harness with 200 ±5 mm red and black UL1007 22 AWG leads and 5 mm tinned free ends.

Best for

Two-wire internal harnesses
2.54 mm connector interconnects
Assemblies requiring pre-tinned wire ends

Avoid if

The mating connector or latch geometry has not been verified
A documented current, voltage, or environmental rating is required

Check before use

Confirm the mating connector family and polarization
Confirm position 1 red / position 2 black wiring
Confirm 200 ±5 mm cable length is suitable

Key specifications

Positions: 2 positions
Pitch: 2.54 mm
Cable length: 200 ±5 mm
Wire: UL1007, 22 AWG, red and black
Free end: 5 mm tinned

Application

Internal equipment wiringWire-to-board connections

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is an XKB Connection 2-position cable assembly. End A uses an X9556H-02B-N0 housing with two X9556T-PSN terminals, while end B provides tinned wire ends.