What should engineers review before using X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5?

Verify connector mating compatibility, the required wire-end termination method, cable length tolerance, and electrical ratings. The supplied drawing does not confirm RoHS, REACH, lifecycle, or pin-pitch data.

What is the pinout of X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5?

Use the X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5 pinout to locate pins, power rails, and interface signals before layout.

X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5 product

X9556T-10-PSN-A22RBYWGLPEN(YR)-L200-T5 is a 10-position, 200 mm wire harness with a connector on one end and tin-plated wire ends on the other.

Best for

Pre-terminated board-to-wire harnesses
Low-voltage internal wiring where the connector and stripped wire ends match the design

Avoid if

A fully terminated cable is required at both ends
The application requires ratings or compliance declarations not stated in the drawing

Check before use

Mating connector and terminal compatibility
Pin pitch and pin numbering
Electrical ratings and applicable compliance requirements

Key specifications

Positions: 10
Wire: UL1007/22 AWG
Cable length: 200 ± 5 mm
Wire-end finish: Tin-plated, 5 mm

Application

Board-to-wire harnessingInternal equipment wiring

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a 10-position cable assembly using UL1007/22 AWG wires. The assembly has an X9556H-10B-N0 housing with X9556T-PSN terminals on one end and 5 mm tin-plated wire ends on the other.