What should engineers review before using X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5?

Check that the 2.54 mm pitch housing mates with the intended connector and that the documented terminal-side viewing orientation matches the required pin order. Confirm that a 300 +/- 5 mm cable and 5 mm tinned wire ends suit the assembly process.

What is the pinout of X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5?

Use the X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5 pinout to locate pins, power rails, and interface signals before layout.

X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5 Datasheet, Specs, Alternatives & ECAD | XKB Connection(中国星坤)

AI summary

X9556T-10-PSN-A22RBYWGLPEN(YR)-L300-T5 product

A 10-position, 2.54 mm pitch harness using UL1007 22 AWG wires. It has a 300 +/- 5 mm cable length, a crimped housing end, and 5 mm tinned free ends.

Best for

10-position internal wiring
2.54 mm connector assemblies

Avoid if

A different connector mating geometry is required
Documented compliance status is mandatory

Check before use

Mating connector compatibility
Pin orientation
Required wire length and termination

Key specifications

Positions: 10
Pitch: 2.54 mm
Cable length: 300 +/- 5 mm
Wire: UL1007, 22 AWG
Free-end termination: Tinned 5 mm

Application

Internal equipment wiringWire-to-board connections

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a 10-position wire harness assembly from XKB Connection. The assembly uses an X9556H-10B-N0 housing, ten X9556T-PSN terminals, and ten UL1007 22 AWG wires.