What should engineers review before using XB7608AF?

Check the 4.30 V typical overcharge threshold, 2.40 V typical overdischarge threshold, 9 A typical overcurrent threshold, short-circuit response, thermal behavior, and suitability of the 0 V battery charging function for the chosen cell.

What is the pinout of XB7608AF?

Use the XB7608AF datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about XB7608AF pinout to locate pins, power rails, and interface signals before layout.

XB7608AF Datasheet, Specs, Alternatives & ECAD | xysemi

AI summary

XB7608AF is a compact single-cell Li-ion/Li-polymer protection IC with integrated low-resistance MOSFETs for battery packs requiring charge, discharge and short-circuit protection.

Best for

Compact one-cell Li-ion battery packs
Li-polymer battery packs
Portable consumer electronics

Avoid if

Multi-cell battery packs
Applications requiring undocumented lifecycle or qualification status
Designs needing an externally configurable protection threshold

Check before use

Confirm cell charging voltage against the 4.30 V typical overcharge threshold
Validate discharge peak current against the protection-current thresholds
Use short, wide high-current PCB traces as recommended by the datasheet
Place the decoupling capacitor close to the IC

Key specifications

Supported battery: One Li-ion/Li-polymer cell
Overcharge detection: 4.30 V typ.
Overdischarge detection: 2.40 V typ.
Overcurrent detection: 9 A typ.
MOSFET resistance: 13.5 mΩ typ.
Package: CPC5, 5 pins

Compliance & Environment

RoHS: RoHS

Application

Single-cell battery packsPortable consumer devices

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

XB7608AF is a 5-pin CPC5 protection IC for one Li-ion or Li-polymer cell. It integrates protection logic and power MOSFETs with 13.5 mΩ typical equivalent on-resistance.