What are the key specifications of XREE13*8?

Primary inductance across pins 1-5 is 0.5 mH ±6% at 1 kHz and 0.25 V. Primary leakage inductance is specified as no more than 20 µH at 10 kHz and 0.25 V. N1-to-N2 withstand voltage is AC 1500 V at 5 mA for 5 seconds without breakdown.

What is the pinout of XREE13*8?

Use the XREE13*8 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about XREE13*8 pinout to locate pins, power rails, and interface signals before layout.

XREE13*8 Datasheet, Specs, Alternatives & ECAD | XR

AI summary

XREE13*8 is an EE13 vertical 4+3-pin transformer specified with 0.5 mH ±6% primary inductance and AC 1500 V primary-to-secondary withstand voltage.

Best for

General electronic equipment using an EE13 vertical transformer
Designs requiring approximately 0.5 mH primary inductance
Through-hole transformer assemblies

Avoid if

A documented RoHS, REACH, or safety certification is mandatory
Exact controlled mechanical dimensions beyond the reference drawing are required
The circuit requires unlisted electrical parameters or a verified turns ratio

Check before use

Confirm PCB hole pattern and pin orientation
Validate winding polarity and isolation arrangement
Confirm inductance, leakage inductance, and temperature performance in the final circuit