What should engineers review before using XRIM252012S1R0MBDZ?

Check the converter's peak and RMS current requirements, saturation margin, thermal rise, PCB layout, recommended land pattern, and the datasheet's inconsistent heat-rating-current entries.

What is the pinout of XRIM252012S1R0MBDZ?

Use the XRIM252012S1R0MBDZ datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about XRIM252012S1R0MBDZ pinout to locate pins, power rails, and interface signals before layout.

XRIM252012S1R0MBDZ Datasheet, Specs, Alternatives & ECAD | XR

AI summary

A 1.0 µH molded power inductor for compact DC/DC and power-management designs, specified for the 2520 footprint and -55 °C to +125 °C operation.

Best for

Compact DC/DC converters
Power-management circuits
Portable electronic devices

Avoid if

The design requires a tighter inductance tolerance than ±20%
The application cannot accommodate the stated current-rating uncertainty

Check before use

Confirm the final rated current using the lower applicable saturation or heating limit
Verify component temperature remains at or below 125 °C
Confirm the 2.5 mm × 2.0 mm land pattern and 1.2 mm maximum height