For BusinessPricing
Request a demo

YDRW1008T-701L035 AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

YDRW1008T-701L035 product

YDRW1008T-701L035

Component

common-mode chokethrough-hole700 µHEMC filterlow-frequency noise suppression

YDRW1008T-701L035 is a 4-pin, through-hole common-mode choke intended for low-frequency EMC noise suppression, with 700 µH minimum inductance per winding and 60 mΩ maximum winding DCR.

Best for

  • Low-frequency common-mode noise filtering
  • Through-hole EMC filtering in consumer AV equipment

Avoid if

  • A documented RoHS, REACH, MSL, or lifecycle declaration is mandatory
  • The design requires an isolation rating beyond the explicitly tabulated hi-pot tests

Check before use

  • Confirm coil polarity: terminals 1 and 2 are dotted
  • Verify the required isolation test because the feature and test-table voltage statements differ
  • Confirm board hole pattern and available height

Key specifications

Inductance
700 µH min. per winding at 1 kHz, 0.25 V
DCR
60 mΩ max. per winding
Turns ratio
14:14 reference
Dimensions
13.5 mm × 9.0 mm × 15.0 mm max.

Application

EMC noise suppressionConsumer AV equipment

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a YJYCOIN 4-pin common-mode choke with two simultaneously wound 14-turn windings. Each winding is specified at 700 µH minimum at 1 kHz and 0.25 V.