Needs validationmedium risk
SMMS0630-100M is a close 10uH alternative needing footprint review.
Best Alternatives to CYA0630-10UH
CYA0630-10UH is a 10uH shielded SMD power inductor. Alternatives need footprint, pad, current, and temperature review before use.
AI replacement insight
Electrical riskmedium
current and DCR vary by candidate
Package riskhigh
no pad drawing match
Firmware risklow
passive part
Sourcing riskmedium
PDF checks pending
Can it be replaced directly?
Direct replacement for CYA0630-10UH should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Start with SMMS0630-100M or MWSA0603S-100MT, then verify pads and low-temperature rating.
Main risk
Footprint and pad geometry are not verified.
Recommended alternatives
5Alternative comparison matrix
| Feature / factor | CYA0630-10UH | SMMS0630-100M | MWSA0603S-100MT | SMMS0650-100M | Compatibility / risk |
|---|---|---|---|---|---|
| Application | 10uH ±20% | 10uH ±20% | - | - | 10uH ±20% — same value |
| Package | 7.0x6.6mm | 7.1x6.6mm | - | - | 6.6x7.0mm — orientation unclear |
| Pinout | 2 pins | 2 pins | - | - | 2 pins — pads not checked |
| Current | Isat 5.5A, Idc 4A | Isat 5.5A, Ir 4.5A | - | - | Isat 5.5A, heat 4.5A — meets listed currents |
| Resistance | 76mΩ max | 68mΩ max | - | - | 68mΩ max — lower DCR |
| Temperature | -55 to 125C | -40 to 125C | - | - | -40 to 125C — cold limit weaker |
Application & sourcing insights
Questions & answers
Verified drop-in options for CYA0630-10UH are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.