Is there a pin-compatible replacement for MLZ2012M100WT000?

SLM2012100MIT shares the same 2012 (0805) package and could be a form-fit replacement. However, it is not a guaranteed pin-to-pin drop-in because its DC resistance is higher, which could affect circuit performance. Engineering validation is required.

What risks should I check before replacing MLZ2012M100WT000?

Before replacing, check three main risks: 1) Package Mismatch: Most alternatives are larger and require a new PCB layout. 2) Electrical Differences: Verify the saturation current (Isat) is sufficient and that a higher DC Resistance (DCR) is acceptable for your power budget. 3) Thermal Performance: Changes in DCR and current rating will affect heat dissipation.

MLZ2012M100WT000 Alternatives, Datasheet & Cross Reference | TDK Electronics AG

Finding a substitute for the TDK MLZ2012M100WT000, a 10µH 0805 inductor, involves balancing physical fit and electrical performance. While form-fit options exist, they require careful review of DCR and current ratings.

AI replacement insight

Package riskhigh

Most alternatives are in larger packages and are not drop-in replacements.

Electrical riskmedium

Even form-fit options have different DCR or current specs that must be validated.

Sourcing risklow

The target is an active part with many functional alternatives available from various manufacturers.

Can it be replaced directly?

No verified direct drop-in replacement has been identified. SLM2012100MIT is a potential form-fit alternative in the same 0805 package, but requires engineering review due to a higher DC resistance.

Best replacement path

SLM2012100MIT is the best starting point as a form-fit alternative, but its higher DCR and unverified saturation current must be reviewed. For performance-critical applications requiring a redesign, WPN4020H100MT offers a significant electrical upgrade.

Main risk

The primary risk is package mismatch for most alternatives, which requires a PCB redesign. For same-package options, differing DCR and current ratings pose an electrical risk.

Recommended alternatives

A potential form-fit replacement in the same 0805 package with higher current rating but also higher DCR.

View details

Alternative comparison matrix

Feature / factor	MLZ2012M100WT000	SLM2012100MIT	VLS6045EX-100M	WPN4020H100MT	Compatibility / risk
Package	2012 (0805)	2012 (0805)	-	-	4020 (4x4mm) — Larger package requires layout change.
Inductance	10 µH	10 µH	-	-	10 µH — Inductance matches.
Current	150 mA	360 mA	-	-	2.8 A (Isat) — Significantly higher current rating.
Dcr	0.47 Ω	0.55 Ω	-	-	0.047 Ω — Significantly lower DCR.
Temperature	-55°C to +125°C	-55°C to +125°C	-	-	-55°C to +125°C — Operating temperature range matches.

Application & sourcing insights

Questions & answers

The best alternative depends on your design constraints. SLM2012100MIT is a potential form-fit replacement in the same 0805 package but requires review. If a PCB redesign is possible, WPN4020H100MT is a strong electrical upgrade with higher current and lower resistance.