Is there a pin-compatible replacement for SLM2012100MIT?

TDK's MLZ2012M100WT000 shares the same 2012 (0805) package and pinout, but its current rating is significantly lower (150mA vs 360mA). This makes it a high-risk replacement that requires careful electrical validation before use.

What risks should I check before replacing SLM2012100MIT?

Key risks include package mismatch, requiring a PCB redesign, and lower current ratings, which can cause the inductor to fail or overheat. Always verify the candidate's rated current, saturation current, and DC resistance (DCR) against your circuit's requirements.

SLM2012100MIT Alternatives, Datasheet & Cross Reference | Sunltech

Finding a replacement for the Sunltech SLM2012100MIT 10µH power inductor involves balancing package size with electrical performance. While form-fit options exist, they may have lower current ratings, and functional upgrades often require PCB changes.

AI replacement insight

Electrical riskhigh

Form-fit options may have significantly lower current ratings, posing a risk of overheating or failure.

Package riskhigh

Electrically suitable alternatives often come in larger packages, requiring PCB redesign.

Sourcing risklow

Multiple vendors produce inductors with similar values, but matching all key parameters is difficult.

Can it be replaced directly?

No direct, risk-free replacement was found. The closest form-fit candidate, TDK MLZ2012M100WT000, has a much lower current rating (150mA vs 360mA) and requires careful validation.

Best replacement path

If PCB layout can be modified, Sunlord SWPA252012S100MT offers an electrical upgrade. If not, TDK MLZ2012M100WT000 is a form-fit option but carries significant electrical risk due to its low current rating.

Main risk

The primary risk is finding a part that is both form-fit (2012/0805 package) and meets or exceeds the 360mA current rating of the original part.

Recommended alternatives

An electrical upgrade with higher current handling, but requires a PCB layout change due to its larger 2520 package.

View details

Alternative comparison matrix

Feature / factor	SLM2012100MIT	SWPA252012S100MT	MLZ2012M100WT000	Compatibility / risk
Package	2012 (0805)	2520	2012 (0805)	2520 / 2012 (0805) — Package is larger and not footprint compatible.; MLZ2012M100WT000: Candidate matches target package size.
Current	360mA	620mA	150mA	620mA / 150mA — Higher current rating provides more margin.; MLZ2012M100WT000: Candidate current rating is less than half of the target's.
Dcr	0.55Ω	0.69Ω	0.47Ω	0.69Ω / 0.47Ω — Higher DCR will increase power loss slightly.; MLZ2012M100WT000: Lower DCR results in less power loss.
Inductance	10µH	10µH	-	10µH — Inductance value matches.
Temperature	-55°C to +125°C	-40°C to +125°C	-55°C to +125°C	-40°C to +125°C / -55°C to +125°C — Slightly narrower operating range at low end.; MLZ2012M100WT000: Operating temperature range matches.
Tolerance	±20%	-	±20%	±20% — Inductance tolerance matches the target.

Application & sourcing insights

Questions & answers

The best alternative depends on your design constraints. For a potential drop-in, TDK's MLZ2012M100WT000 matches the package but has a lower current rating. For higher performance, Sunlord's SWPA252012S100MT offers better current handling but requires a layout change.