What should engineers review before using SX3M48.000A10F20TNN?

Check that the design supports its 4.5 V to 5.5 V supply range, 15 pF CMOS load condition, tri-state enable behavior, 3CA land pattern, and specified -40 °C to +85 °C operating temperature range.

What is the pinout of SX3M48.000A10F20TNN?

Use the SX3M48.000A10F20TNN datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about SX3M48.000A10F20TNN pinout to locate pins, power rails, and interface signals before layout.

SX3M48.000A10F20TNN Datasheet, Specs, Alternatives & ECAD | SCTF

AI summary

SX3M48.000A10F20TNN is a 48 MHz, 5 V CMOS SMD crystal oscillator in the 3CA 3.2 mm × 2.5 mm package.

Best for

5 V digital clock generation
Wireless and network equipment
Embedded systems requiring a 48 MHz CMOS clock

Avoid if

The design requires a supply voltage below 4.5 V
A clock specification tighter than ±10 ppm tolerance or ±20 ppm drift is required
The PCB cannot accept the 3.2 mm × 2.5 mm footprint

Check before use

Confirm frequency tolerance and drift requirements over the target temperature range
Include probe and fixture capacitance when evaluating the 15 pF output load
Confirm OE pin state; low disables the output and high or open enables it