What should engineers review before using SX5M18.432A10F20TNN?

Check that the board provides 4.5 V to 5.5 V, the receiving input is compatible with CMOS levels, the effective output load is within the 15 pF condition, and the -40 °C to +85 °C range is sufficient.

What is the pinout of SX5M18.432A10F20TNN?

Use the SX5M18.432A10F20TNN datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about SX5M18.432A10F20TNN pinout to locate pins, power rails, and interface signals before layout.

SX5M18.432A10F20TNN Datasheet, Specs, Alternatives & ECAD | SCTF

AI summary

SX5M18.432A10F20TNN is an 18.432 MHz, 5 V CMOS SMD oscillator in the SCTF 5CA package family.

Best for

5 V CMOS clock generation
Wireless and IoT electronics
Ethernet, audio, video, and gaming equipment

Avoid if

A 3.3 V or lower-voltage oscillator is required
The design requires a different package footprint
A tighter frequency-stability requirement than ±20 ppm drift is needed

Check before use

Verify pin 1 output-enable connection; low disables the output while high or open enables it.
Verify the 5CA 5.0 mm × 3.2 mm land pattern.
Allow for stated first-year aging of ±3 ppm.