What should engineers review before using SX5M40.000A10F20TNN?

Confirm the 5 V rail, 15 pF CMOS output-load condition, ±10 ppm tolerance, ±20 ppm frequency drift, -40 °C to +85 °C range, and the pin-1 tri-state enable function. Pin 1 low disables the output; high or open enables it.

What is the pinout of SX5M40.000A10F20TNN?

Use the SX5M40.000A10F20TNN datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about SX5M40.000A10F20TNN pinout to locate pins, power rails, and interface signals before layout.

SX5M40.000A10F20TNN Datasheet, Specs, Alternatives & ECAD | SCTF

AI summary

SX5M40.000A10F20TNN is a 40 MHz, 5 V CMOS SMD crystal oscillator in SCTF's 5CA package.

Best for

5 V logic clock generation
Industrial and wireless electronics using a 40 MHz CMOS reference
Designs requiring a 5.0 mm × 3.2 mm SMD oscillator

Avoid if

The design only provides 1.8 V, 2.5 V, or 3.3 V supply rails
A tighter total frequency stability than the stated tolerance and drift is required
Lifecycle or export classification documentation is mandatory before component approval

Check before use

Use the 5CA land pattern and verify pin orientation from the marking.
Place local supply decoupling near VDD; the test circuit shows 0.01 µF.
Confirm input loading and measurement setup do not exceed the specified 15 pF CMOS load.